HOW TO INSTALL YOUR MAGNETIC USB LED LIGHT

Identify the type of mount (V1 or V2) suitable for your helmet model and the correct position to apply to the helmet.

V1 MOUNT

Compatible helmets and correct positions:

Allroad / Allroad Mips

Veleno / Veleno Mips

Vinci Mips

Mounting instructions:

1.

Clean the helmet surface with mild soap and water and allow to dry.

2.

Remove the red film from the adhesive tape.

3.

Apply the light to the mount in the correct position.

4.

Apply the mount to the helmet with the light mounted to check its correct positioning.

Attention! Once attached, the adhesive mount cannot be moved or removed and reused.

5.

Remove the light from the mount and let it rest for 24 hours before use.

Attention! Respect the bonding time of the adhesive to avoid premature detachment of the substrate.

V2 MOUNT

Compatible helmets and correct positions:

Rivale Mips

Mounting instructions:

1.

Clean the helmet surface with mild soap and water and allow to dry.

2.

Remove the red film from the adhesive tape.

3.

Apply the light to the mount in the correct position.

4.

Apply the mount to the helmet with the light mounted to check its correct positioning.

Attention! Once attached, the adhesive mount cannot be moved or removed and reused.

5.

Remove the light from the mount and let it rest for 24 hours before use.

Attention! Respect the bonding time of the adhesive to avoid premature detachment of the substrate.

HOW TO INSTALL YOUR MAGNETIC USB LED LIGHT

Identify the type of mount (V1 or V2) suitable for your helmet model and the correct position to apply to the helmet.

V1 MOUNT

Compatible helmets and correct positions:

Mounting instructions:

1.

2.

3.

4.

5.

V2 MOUNT

Compatible helmets and correct positions:

Mounting instructions:

1.

2.

3.

4.

5.

SUMMER BREAK